Hobart UP Utensil Washer

• Front loading utensil washer
• Useable inside dimensions: W: 520 x D: 808 x H: 840mm
• Nominal capacity up to 30 cycles/h
• 6 automatic programmes: short, standard, steam washing, detergent direct spraying, continuous, hygiene
• Cycle times: 120 / 240 / 280 secs and special cycles
• Water consumption: 8 l/rack
• Rack Size: 600x760mm
• Loading height: above-average loading height of 860mm
• Double walled housing
• Strainer soil sensor
• Separate tank fill (can be de-activated)
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• Tank, frame, wash / rinse arms and panels are stainless steel
• Standard with Exhaust Heat Recovery and VAPOSTOP
• Extra capacity by side wash system: capacity up to 6 GN-trays 1/1 or 4 EN2 container
• Detergent direct spraying system: system soaks the wash ware following the detergent pre-washing cycle and softens even the most severely encrusted food residues
• VISIOTRONIC control:single-button control with remaining time indicator together with text and graphic display
• SENSO-ACTIVE resource management:constantly measures the quality of the wash water and keeps the amount of rinsing needed in each rinse cycle to the minimum in order to guarantee a fully hygienic wash result
• POWER wash:high-pressure washing to wash heavily soiled wash items
• CLIP-IN wash and rinse arms: wash and rinse arms can be removed with one hand and without any tools
• USB-interface:comfortable download of operational data in form of a protocol via USB
• GENIUS-X² fine filter system: advanced filter system with prewash function reduces detergent consumption up to 35%
• ROTOR-X wash system:separate rotating upper and lower 4-spoke wash arms deliver dynamic wash power
• VAPOSTOP: prevents vapour to escape from machine when door is opened
• The optional exhaust heat recovery uses steam to heat fresh feed water and reduces the amount of power needed, saving up to 4.5 kW
• Intelligent energy management: the available energy is used continuously. Thus, at a low total loading value the heating time gets reduced
• VAPO-ACTIVE steam washing: significantly less manual pre-cleaning and second runs by intensive wash cycles with steam injection
• Interlocked strainer: prevents operation without tank strainer
• EASY-CLEAN concept: blue markings in the machine help the operator to identify the components which require cleaning
• Hygiene programme: for removal of calcium carbonate and other deposits from wash chamber
• Ready to install - completely equipped: fill / drain hose, electrical cable, detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer, tank heating, separate tank fill (can be deactivated), back panel
• Includes - stainless steel base rack, tray support insert and plastic 500x500mm flat rack
• Watermark approved to WMTS-101:2018, Cert. WMKT21944

For machine protection the water hardness should not exceed 3°dH, if higher we recommend using a HOBART HYDROLINE water softener / treatment system.